Products

FRP Gratings

FRP gratings are glass fiber reinforced composite products with superior physical and chemical properties used in industrial or service sectors. Glass-reinforced plastic gratings are also known as FRP composite gratings, composite gratings, fiberglass gratings or composite sheets.

Casting type FRP gratings come into play with the production of glass fiber and suitable resin and pigment combination as square or rectangular cell plate with open moulding technique. Its structure is light weight, resistant to corrosion and has high carrying capacities.

FRP gratings may generally be preferred for flooring in many industrial applications that have pressure or exposed to chemical effects, and there are many other uses in the field such as protection and decoration.

Properties
Advantages of FRP Gratings

FRP gratings are alternative products with superior advantages over conventional casting, galvanized or stainless metal gratings;

They are of low weight:
Transportation costs are less than metal counterparts. They are easily transported during assembly and are easy to install.

They have high carrying capacities:
They have superior tensile, tilting and compressing values from steel. They are resistant to the bumps, they are elastic and overloaded in overloads.

They are resistant to corrosion:
They do not rust or rot.

They do not have electrical conductivity:
They can be used where work safety is important.

Thermal conductivity is low:
They provide very good insulation.

Dimensional stabilizations:
They do not stretch or shrink.

They are not magnetic:
They can be used alternatively in sensitive places where magnetization of metal grids is not desired.

They are resistant to UV rays:
They do not deform.

They can be processed in a simple way:
They can be cut with simple carpenter tools like saw.

No recycling:
There is no risk of being stolen because it is not worth the scrap.

They do not require paint or maintenance:
They can be cleaned easily with pressurized water.

They can be manufactured in all sorts of colours:
They can be produced in the desired colour in places where architectural practices and work safety require.

Long life:
They do not experience deformation theoretically.

They have non-slip properties:
They can be used on greasy, wet or dry surfaces.

Light transmittance properties can be achieved:
They can be used in applications where light transparency is desired.

Chemical and combustion resistance can be increased:
Special types of resins and chemical additives can provide improved corrosion resistance and combustion resistance.

Types of usage and applications of FRP gratings

FRP grids have a wide range of applications due to their superior structural properties;

  • Water and wastewater treatment plants
  • Chemical plants
  • Food facilities
  • General production facilities
  • Electricity distribution applications
  • Marine applications & shipyards
  • Coastal and scaffold applications
  • Architecture and building applications
  • Home and garden applications
  • Public and commercial applications

and they can be used in special applications.

Example types of applications:

  • Walking trails
  • Platforms
  • Ramps
  • Stairs
  • Drain covers
  • Water canal covers
  • Cable duct covers
  • Shelf systems
  • Animal shelter floors
  • Car wash floors
  • Fences
  • Decorations
  • Custom floor coverings

and can be used suitable to similar needs.

Product Details

FRP Gratings Size Types

Our company is able to manufacture FRP gratings in standard structure in different types and sizes, and there is a wide range of products in this context. In addition to this, we are able to produce to meet our customer demands with the use of special types of resins and chemical additives suitable for the required usage conditions. In addition, up to professional CAD drawings, production can be carried out with special measures to meet your specifications.


 
Item No
Type Code
Mesh Size (mm)
(A x B)
Height (mm)
(H)
Standard Panel Size (mm) Open Area
Weight (kg/m2)
1 CK-001 H25
38 x 38 25 1035 x 4040 68% 12,3
2 CK-002 H30
38 x 38 30 1035 x 4040 68% 14,6
3 CK-003 H38
38 x 38 38 1035 x 4040 68% 19,5
4 CK-004 H58
38 x 38 58 1000 x 2670 54% 48,7

FRP Grating Surface Types

1) Regular Type Grating Surfaces

FRP gratings are produced with open ceiling and bottom surfaces as standard, and surface characteristics can be manufactured in different types according to customer demand or application point requirements.

Concave Surface Gratings

This is the most common and standard surface type among FRP gratings. The grating section is in a concave form. It is suitable for use against slipping in many environments, including wet and greasy conditions. It's easy to clean if necessary.

Sand Surface Gratings

The surface of the concave grating surface is coated with binding resin and quartz sand. The shear resistances of such grids are high. It is suitable for use in wet or damp environments and places where extra nonslipping is required. The cleanability in the working environments of greasy materials is limited.

Flat Surface Gratings

The concave grating surface is processed to make it brighter and smoother. They have a nice appearance, so they are usually used for decoration purposes. For example, façades or covering panels can be realized by applying gratings with flat surface



2) Covered Type Grating Surfaces (Single Sided)

Covered type gratings are formed by joining flat surface gratings with the respective composite plate. The combined standard composite plate thickness is 3 mm. Covered gratings are preferred in environments where grating open cells are not desired. For example, since they are completely closed, they are suitable for use in pits, cable duct covers, walkways. They can also be easily laid out with the aim of creating a safe working area on the construction site, lakes edge, permanent roads in the factory areas, sandy, muddy, slippery places where platforms can be / cannot be built. As their top surfaces are closed, their strength is also increased compared to normal grating surface types.

Sand Covered Surface Gratings

It is obtained by joining the upper part of the flat surface grating with the sand surface composite plate.

Diamond Pattern Covered Gratings

It is obtained by joining the upper part of the flat surface grating with the diamond patterned composite plate.


FRP Grating Mounting Elements

1) FRP Grating Fastening Elements

The fasteners are used to fix the grill to the floor to be installed or to connect two gratings of the same type. At least one connection element must be used for each corner for a single grate to be mounted on the floor. Different types of fasteners are available depending on the mounting style.

M Type Connector

They are used to stabilize the grille and prevent it from turning in all directions.
Manufactured from galvanized or stainless steel.
It consists of 4 parts as lower - upper butterfly, nut and flake.
When ordering the fastening element, the grating size and profile dimensions to which the grating is connected must be specified.


C Type Connector

They are used to stabilize the grille and prevent it from turning in all directions.
Manufactured from galvanized or stainless steel.
It consists of 4 parts as lower - upper butterfly, nut and flake.
When ordering the fastening element, the grating size and profile dimensions to which the grating is connected must be specified.


L Type Connector

They are used to stabilize the grille and prevent it from turning in all directions.
Manufactured from galvanized or stainless steel.
It consists of 4 parts as lower - upper butterfly, nut and flake.
When ordering the fastening element, the grating size and profile dimensions to which the grating is connected must be specified.

Sample applications

 


2) FRP Grating & Concrete Mounting Profile (Y Type Composite Profile)

Concrete installation profile (Y type profile) is a special building element which is placed on the relevant sides before the concrete is poured for the openings to be applied on the grating, and serves as a lathe for the gratings when the concrete hardens.

They allow a safe and secure mounting by matching surface to surface with gratings. They are corrosion-resistant, they have rugged structure and their installation costs are better than stainless steels. They are manufactured in Y shape with a length of 6 meters as a standard, while they can be cut at different sizes if desired. They are produced in grey concrete colour or yellow.

A (mm) B (mm) C (mm)
38 38 6

Sample applications


Photos